The Hurco Max 5 control supports an optional wireless remote jog unit. This video will guide you through the process of pairing a wireless jog to a wireless control.

There is a sticker on the back of the wireless remote jog unit displaying the serial number.
This serial number will be needed for pairing.
First, from the main input screen, we will press the AUX/Menu button on the control.
Then select the utilities softkey, and then more…
On this screen, select the wireless jog unit pairing softkey and then the scan for radios softkey
You will see a message that says scanning for nearby radios, please wait
After several seconds, the following screen will be displayed showing any discovered radios
Now select the radio button left of the serial number that matches the number on the jog sticker.
If a matching number is not seen, select scan for radios to try again. Select Pair with selected radio.
The following screen will be displayed. Now your wireless jog unit has been paired with the control and is now ready for use.

FAQ // <![CDATA[ _spBodyOnLoadFunctionNames.push("setupPageDescriptionCallout"); // ]]>

FAQ