VC500i

5-Axis Cantilever Machining Center

The 5-Axis cantilever design supports a wide range of parts and allows you to use standard length tooling due to the B-axis configuration. The full +110° / -110° B-axis motion provides superb undercut capability.

Request Price Scroll to Machine Specifications
VC500i - 5-Axis Cantilever Machining Center - Hurco

Machine Specifications

Spec.Imperial (Metric)

Travels & Capacity

X, Y, Z Axis Travel
20.5 x 17.7 x 15.8 in (520 x 450 x 400 mm)
Spindle Nose to Table5.9 in min / 21.7 in max (150 mm min / 550 mm max)
Table Diameter19.7 in (500 mm)
Max. Weight on Table550 lbs (250 kg)
B Axis Motion-110°/+110° ( -110°/+110°)
C Axis Motion 360°
T-Slot Size3.9 in (100 mm)

Spindle

Max. Spindle Speed
12000 rpm
Spindle Power (peak)17.4 hp @ 1500 rpm (13 kW @ 1500 rpm)
Spindle Torque (peak)60.5 ft. lbs @ 1500 rpm (82 Nm @ 1500 rpm)

Tool Changer

Tool Type
CAT 40 (CAT/BT 40)
Number Of Tools30
Max Tool Diameter 3.1 in (80 mm)
Max Tool Length 9.8 in (250 mm)
Max Tool Weight15.4 lb. (7 kg)

Feedrates

Rapid Traverse X,Y,Z Axis
1100 in/min (28 m/min)
Max. Programmable Feedrate1100 in/min (28 m/min)
B-Axis RPM25 rpm
C-Axis RPM25 rpm

Size

Max. Operating Floor Space
180.8 x 141.9 in (4,592 x 3,604 mm)
Machine Height115 in (2,920 mm)

Electrical

Power rating / full load KVA
34 KVA
Machine Weight18,520 lbs (8,400 kg)
Optimum machine performance is reliant upon installation conditions at the facility, such as power supply, air supply, and ambient air conditions. Information may change without notice.

One Technology Way, Indianapolis, IN 46268 | 800.634.2416 | info@hurco.com | HURCO.com