“I had worked some with Hurco mills in the past,” notes Lanese. “I wasn’t even aware that Hurco was producing a lathe, but I had a chance to see one at a trade show in Dayton. I ended up making the purchase in early December and the machine was installed just a few weeks later.”--Mark Lanese
Lanese Quality Tool of Centerville, Ohio is a start-up shop owned by Mark Lanese. For the past few years, Mark has been producing parts using bed mills and lathes for customers in various industries including robotics, printing equipment, automotive, aerospace and motor manufacturing.Key Hurco AdvantageSince many of his customers are relying on lean manufacturing demands, Mark’s livelihood depends on precision and quick turnover. The poor productivity of his existing two-axis flat bed lathe with a manual four-position tool post was making it hard to compete as cycle times were simply too slow. These factors led to his decision to purchase a new Hurco TM8 slant-bed CNC turning center.Mark was able to pick up on the easy-to-learn conversational programming the first day and was producing parts the next. Now he’s regularly running jobs with 100-500 piece quantities and he’s saving days (not just hours) of production time on single jobs.The level of automation in the TM8 slant bed lathe with full auto turret has significantly reduced his cycle times and has freed up Mark to work on other jobs or generate new ones. In just his third job, Mark was significantly reducing cycle times. A 20-piece job would have normally required programming and reprogramming. Also, Mark would have stayed with the machine through the entire process to make sure the cuts were consistent on each piece and to change tools or fix broken pieces. With the Hurco, Mark spent twenty minutes programming and each piece took just three minutes to complete. There was no need to tweak the program. With the older lathes, programming might be the same, but each piece would take 10-15 minutes to complete and he’d have to closely inspect each piece for variations.SummaryAnother job showcases the capabilities of the Hurco TM8. This particular part requires multiple inside diameters, two grooves, and five different outside diameters using 304 stainless bar stock with a total run of 250 pieces. Using his existing flat-bed lathe, the cycle time was 40 minutes for each piece since every tool change was manual. The total job time was 150 hours. Using the new Hurco TM8, the job took 40 minutes to program and just 8 minutes to process each part — a grand total of 33 hours. The TM8 saved Mark nearly five days of machining time — time that can be spent working on other projects.
“I bought my first Hurco 17 years ago because I wanted to have a lean, fast turnaround, customer-focused business. After recently installing my 13th Hurco, ‘lean’ is a way of life at Gregor Technology.”- John Gregorich, Vice President Hurco helps firm go lean from the beginning John Gregorich founded Gregor Technology in 1985 and built the business by providing fast turn-around of small-lot quantities for his customers. He needed a machine that could be programmed on the shop floor because he didn’t want the overhead or have the time that a CAD/CAM system can require. When he saw a Hurco control demonstration at a local machine tool show years ago, he bought his first Hurco – a 3HP knee mill. He was producing parts within two days and providing the kind of fast turn-around service that has become his operational trademark today. Gregor is now a 30-man, custom contract, job shop serving New England. It specializes in small lot, just–in-time operations for a variety of customers in the specialty auto parts, aerospace and electronics industries. Gregor has continued to grow, even in this recent downturn, by focusing on customer service. “You want it when?” is not a joke at Gregor Technology. By managing materials from suppliers and focusing on shop floor operations with machine operators, Gregor routinely ships orders in two or three days from receipt of the formal order. The payoff is more business from customers who are cutting back on the number of their suppliers to increase cash flow. This is critical to a small firm’s ability to grow. The latest Hurco addition is the VM1 machining center. Formally introduced at IMTS 2002, the VM1 is specifically designed for shops looking for the efficiencies of a machining center with excellent operating specifications packaged to occupy a minimum of floor space. “The VM1 is a real winner,” said John. “It is perfect for many of the small parts that Gregor Technology works with every day. When coupled with Hurco’s new MAX® conversational control with a color LCD display, all of our machinists want a chance to run the VM1.”The Hurco Lean Manufacturing Solution John has a 20,000 sq. ft. facility, 13 Hurco machines and a growing list of loyal customers. The Hurco machines that John uses have allowed him to operate with low overhead and direct processing of jobs on the shop floor. “Lean manufacturing”, the latest trend in manufacturing, is old hat at Gregor Technology. The Hurco integrated control, software and machine system make programming, editing, and set-up fast and efficient, keeping costs down and cash flow up — two very powerful factors for success in today’s fiercely competitive environment. While several local shops have failed in the recent downturn, Gregor is expanding. Training operators on Hurco machines is fast and easy, so John can take advantage of opportunities as they arise. That keeps customers happy and coming back for Gregor’s special brand of service. Gregor is growing and successful because John organized his business from the start to be a lean, efficient producer of small-lot machined parts. Hurco machines are the perfect solution for this concept.
Murray Mold and Die is a job shop in Murray, Kentucky, serving western Kentucky and Tennessee. The twelve person tool and job shop has worked with both CNC milling and turning machines from other machine manufacturers, including a Japanese CNC turning center with an 8" chuck and live tooling. Murray Mold & Die understands what they need in a lathe to be competitive.In September of 2004, Jerry Duncan, who owns the shop, attended the IMTS show in Chicago and had a chance to see the new Hurco CNC slant-bed turning centers up close. He realized that he needed to expand his shop to stay competitive, but he didn't like the rising cost of machines from manufacturers that he had purchased from in the past. Although he had never purchased a Hurco machine, he liked what he saw in the new Hurco TM Series and decided to place an order for a TM8.Key Hurco AdvantageCasey is Murray Mold & Tool's resident lathe expert. He’s been using their existing turning center for several years and quickly noticed that the Hurco TM8 was different. After just a month of using the TM8, he was very pleased with the performance and the results. In particular, Casey likes the verification graphics on the control. Being able to see the cuts graphically-- before they are made--leaves no reason to make expensive and time consuming mistakes or “trial runs” on real stock. This feature alone saves both money and time. The part accuracies and cycle times are exactly what he would expect from any high-end CNC slantbed turning center. While most of the programming for milling operations at Murray Mold & Tool is done offline with CAM software, they are currently not using CAM for turning. Casey has been delighted at just how easy it was to learn the intuitive Hurco control.