Skip Ribbon Commands Skip to main content

Online Video Introduction

These online videos will help you learn to program the Hurco WinMax conversational control. At the end of each lesson you will be given the opportunity to apply what you have learned. Follow the link provided to download the corresponding drawing for that particular section. Getting started:

  • Download the WinMax desktop software by clicking here
  • Follow the “Getting Started with WinMax” tutorial to install your new software
  • Sit back and enjoy the lesson videos.
  • Learn at your own pace!


Search videos:
 
  • Transform Plane - an Introducton

    Transform Plane - an Introducton

    ​Video One...this video discusses the basics of multi-sided programming using a transform plane block. The other videos in this series will build on this principle.
    5:20 minutes
  • Transform Plane - programming the right side

    Transform Plane - programming the right side

    ​Video Two...programming features on the right side of the part using transform plane.
    8:42 minutes
  • Transform Plane - programming the front side

    Transform Plane - programming the front side

    ​Video Three...programming features on the front side of the part using transform plane.
    3:55 minutes
  • Transform Plane - 45 degree angles

    Transform Plane - 45 degree angles

    ​Video Four...using the end of an endmill to chamfer the edge of a part.
    6:11 minutes
  • Transform Plane - 45 degrees the other way

    Transform Plane - 45 degrees the other way

    ​Video Five...using the side of an endmill to chamfer an edge on the part.
    4:14 minutes
  • Transform Plane - compound angles

    Transform Plane - compound angles

    ​Video Six...programming compound angles and multiple data blocks.
    6:04 minutes