Skip Ribbon Commands Skip to main content

WHAT TYPE OF OIL SHOULD I USE IN MY PH SERIES PRESS BRAKE AND HOW OFTEN SHOULD I REPLACE AND WHAT ARE THE CAPACITIES OF OIL NEEDED  

This article applies to:
Metal Fabrication 
PH Series 
Autobend PH 124
Autobend PH 123 
Autobend PH 30-12 
Autobend PH 40-20
Autobend PH 65-25
Autobend PH 90-30

Answer:
The recommeded oil replacement schedule for my PH Series Press Brake is:
(1) After the first 200 hours of operation (2) Every 1000 hours of operation there after.
Recommended Hydraulic Oil Types:
BP HL 65
ESSO TERESO 43
SHELL TELLUS T32
MOBIL DTE 13
Or any equivalent of the above can be used.
The capacity of oil required per Press Brake Model:
· PH30-12 uses 10.5 US Gallons
· PH40-20 uses 10.5 US Gallons
· PH65-25 uses 15.8 US Gallons
· PH90-30 uses 21.1 US Gallons
· PH 123 uses 26.4 US Gallons
· PH 124 uses 39.6 US Gallons

 
 
Bookmark this post with: