Skip Ribbon Commands Skip to main content

SET UP PROCEDURE FOR SPINDLE SPEED PCB FOR HURCO KM3/3P TYPE KNEEMILLS  

This article applies to:

  • KM3 KNEEMILL
  • KM3P KNEEMILL


    Answer:

PROCEDURE TO SET UP SPINDLE SPEED CONTROLLER FOR
KM3/3P TYPE KNEEMILLS
 
Problem description:
Setup of the Automatic Spindle speed controller PCB 713-0012-442
Adjustments:
P1- Adjusts the F/V converter output.
P2- Adjusts for acceptable RPM.
P3- Not used.
P4- Adjusts the acceptable RPM window. CW - more accurate; CCW - less accurate.
P5- Not used.
P6- Not used.
P7- Adjusts the wait and hold times. CW - shorter; CCW - longer.
P8- Not used.

 

 
 
Bookmark this post with: