Skip Ribbon Commands Skip to main content

IF ULTIMAX REPORTS ERROR MESSAGE "INTERNAL MOTION CTRL ERROR ON XXXX, CODE=XXXX"  

This article applies to:
UltiMax
UltiMax Controls and Software 

Answer:
If UTILMAX is reporting Error Message " INTERNAL MOTION CONTROL CTRL ERROR ON XXXX, CODE=XXXX":
PROBLEM: Program and Machine Speed compatability issue
SOLUTION: (1)Reduce Program Feed rate (2) do not use axis over ride pot while program is running (3) power down the control (4) If problem persists, send a copy of the program with error message toservice@hurco.com or contact Hurco Technical Support for other solutions.

 
 
Bookmark this post with: