Skip Ribbon Commands Skip to main content

SET UP PROCEDURE FOR SPINDLE SPEED PCB FOR HURCO KM3/3P TYPE KNEEMILLS  

Answer:

PROCEDURE TO SET UP SPINDLE SPEED CONTROLLER FOR
KM3/3P TYPE KNEEMILLS
 
Problem description:
Setup of the Automatic Spindle speed controller PCB 713-0012-442
 
Adjustments:
            P1-       Adjusts the F/V converter output.
            P2-       Adjusts for acceptable RPM.
            P3-       Not used.
            P4-       Adjusts the acceptable RPM window. CW - more accurate; CCW - less accurate.
            P5-       Not used.
            P6-       Not used.
            P7-       Adjusts the wait and hold times. CW - shorter; CCW - longer.
            P8-       Not used.

 

 
 
Bookmark this post with: