Skip Ribbon Commands Skip to main content

Terms and Conditions


COPYRIGHT, TRADEMARK, and PATENT information
All content included on this website is the property of Hurco Companies, Inc., and is protected by American and other national and international copyright laws.

Trademarks may not be used with any other product or service that is not Hurco’s, or used in any manner that may cause confusion, or disparages or discredits Hurco. The following are registered trademarks of Hurco Companies, Inc., in the United States of America and other countries

Use of these terms must be accompanied with the registered trademark symbol upon each reference and the appropriate descriptor as the trademarked term cannot be used as a noun by a third party. The registered trademarks and appropriate descriptors are listed below. Third party use of these terms also requires the appropriate trademark attribution be visible to the reader.

Acroloc® controlled drilling and milling machines

Hurco® machine tool, mill, lathe, machining center, turning center, product, or other appropriate descriptor. When referring to corporate information or the company in general, use Hurco Companies, Inc.

WinMax® control software

Autobend® press brake system

UltiMax® control console

MAX® control console

UltiPath® controllers (China, Japan, Taiwain)

Trademark Attribution: [Trademarked term inserted here] is a registered trademark of Hurco Companies, Inc.

Many products shown on this website are protected by patents in the United States of America or other patents, utility models, or trade models in other countries.

DISCLAIMER
All information is subject to change without notice. Optimum machine performance is reliant upon installation conditions at the facility, such as power supply, air supply, ambient air conditions, etc. Many products are shown with options. Optimum machine performance is reliant upon installation conditions at the facility,such as power supply, air supply, and ambient air conditions. UL, CSA, NFPA 79 independently certified, with CE certification optional. Prices and information may change without notice. Information provided shall not constitute a representation, warranty, or other commitment by Hurco Companies, Inc., or its affiliates, parent companies, or its agents or sales representatives with respect to any product or service. Hurco Companies, Inc., hereby disclaims all warranties, express or implied, as to the accuracy, suitability for any purpose.
 
In no event shall Hurco Companies, Inc., its affiliates, parent companies, suppliers, and/or its licensors be liable for any special, indirect, or consequential damages, or any damages whatsoever resulting from the use of information on this website.

TERMS of USE
If you do not agree with disclaimers and other directives listed here, please do not use this website. This website is intended to be helpful to customers and interested parties, but Hurco Companies, Inc., cannot be held responsible for the accuracy of all content, downloaded files, and links.
 
Attributions for third party trademarks used on this website:
Apple is a registered trademark of Apple Inc., registered in the U.S. and other countries.
Fanuc is a registered trademark of FANUC LTD. 
Intel is a registered trademark of Intel Corporation in the U.S. and/or other countries. 
RENISHAW is a registered trademark of Renishaw plc, in the United Kingdom and other countries.
Siemens and the Siemens logo are registered trademarks of Siemens AG.
TrueType is a registered trademark of Apple Inc., registered in the U.S. and other countries.
Windows is a registered trademark of Microsoft Corporation in the United States and other countries
Top