The TMX10 is a true slant-bed lathe, which provides increased rigidity and facilitates larger capacity. Increased productivity was the objective for all product decisions when developing the

TMX10. All digital control, drives, and motors with absolute encoders on all linear axes result in superior surface finish capability. The programmable tailstock and superior graphic capabilities promote increased productivity.

Downloads

TMX Series Brochure

Data Sheet

Video Demo

Features / Options

Best in class features

Index position within one degree.
Generous through-hole.
Faster servo turret instead of hydraulic.
Hydraulic system with heat exchanger promotes thermal stability, which increases reliability and extends the life of the machine.
Ergonomic design features, such as front foot pedals to quickly open/close the chuck and engage/disengage the tailstock, provide maximum productivity and convenience.
Options are plug and play so they can be easily added at any time.
Hurco products are UL, CSA,

Coolant/ Chip Removal

Chip Conveyor

Coolant Screen System

High Pressure Coolant Ready

Telescopic Way Covers

Wash Down Gun and Air Gun

Spindle/ Motor

High Speed Servo Systems

Low Air Pressure Switch

Spindle Chiller

Tooling/Accessories

Bar Feeder

Collet Chucks

Chuck Air Blast

Tooling

Tool Setter

Frame/Cabinet

Auto Door, Door Interlock

E-Stop Button on Control

Easy Access Side Door with Latch

Fully Contained Tool Storage Shelves

Linear Rails

Lube Oil Separator

Parts Conveyor, Parts Catcher

Power Cabinet Air Conditioner

Power Cabinet Heat Exchanger

Solid One Piece High-Grade Cast Iron Bed

Work Light

Specifications

X, Z, W Axis Travel, inches (mm)		9.15 x 26 x 29.13 (232 x 660 x 740)
Swing Over Cross Slide, inches (mm)		16.3 (415)
Distance Between Centers, inches (mm)		33.6 (854)
Max Cutting Diameter, inches (mm)		16.3 (415)
Max Cutting Length, inches (mm)		25 (635)
Bar Capacity, inches (mm)		3 (76.2)
Peak Spindle Motor, Main Spindle, hp (Kw)		37.3 (27.8)
Max Spindle Motor Torque ft lbs (Nm) @ rpm	3k	258.2 (350) @759
Rapid Traverse X, Z Axis, inches (M) / min		945 / 1,181 (24 / 30)
Tool Shank, inches (mm)		1 (25) Square
Number of Tools Standard		12 / Slotted
3 Jaw Chuck, Main Spindle, inches (mm)		10 (254)
Turret Index Time - Adjacent, seconds		0.12
Positioning, inches (mm)		±0.0004 (0.010)
Repeatability, inches (mm)		±0.0002 (0.005)
Weight, pounds (Kg)		13,420 (6,100)