Solutions

Home

Products

Technology

Challenges

Support

Hurco Companies, Inc.

Solutions

Hurco Technical Support Articles

Search Again...

All solutions, sorted by most requested.
Displaying 1 - 5 of 84

HOW TO HOOK UP A RS 232 CONNECTION TO A HURCO WITH ULTIMAX CONTROL. ALSO HYPER TERMINAL SETUP INFORMATION

Please see attached document on how to hookup a RS 232 Connection to a Hurco. ... Article #40

Number of Views: 6303

SET UP PROCEDURE FOR SPINDLE SPEED PCB FOR HURCO KM3/3P TYPE KNEEMILLS

PROCEDURE TO SET UP SPINDLE SPEED CONTROLLER FOR KM3/3P TYPE KNEEMILLS Problem description: Setup of the Automatic Spindle speed controller PCB 713-0012-442 Adjustments: P1- Adjusts the F/V converter output. P2- Adjusts for acceptable RPM. ... Article #13

Number of Views: 3575

TAPE READER IS NOT WORKING ON MY B/BX TYPE HURCO MACHINE TOOL

Due to the rapid changes in electronics and changes in today’s market place, the MASTER TAPES on the “B/Bx” control machines are no longer available. The Tape reader manufacture dropped the line & support several years ago. We are recommending our customers to upgrade to the TAPE READER E ... Article #1

Number of Views: 3315

RECOMMENDED LUBRICANTS

See Attached Document for Recommended Lubricants for Hurco Machine Tools ... Article #36

Number of Views: 3195

CHECKING AXIS CURRENTS ON A HURCO MACHINE TOOL USING FANUC OR YASKAWA SERVO'S

Please see the attachment for Checking Current Draws on a Hurco Machine Tool using Fanuc or Yaskawa Amps for Max II, Max 32, or Max 3 Type Machines. ... Article #12

Number of Views: 3157